Slackware  Knowledge Base  
 
 
  ZoneCheck 
  IRC 
  Newsgroups 
Main
Home
     
Site Net

Windows 2000 Dial-Up Configuration


Making a New Dial-up Connection

 

  1. You can get to the Dial-Up Networking Folder by clicking the Start button and selecting Settings and then clicking Network and Dial-up Connections

    Make

  2. Double click the Make New Connection icon. If you havenīt previously configured Dialup Networking then the screen below will ask you for some basic information. If you donīt see the screen below, than skip to step three

    Location

  3. In the Network Connection Wizard window, click Next

    Network

  4. Select Dial-up to the Internet and then click Next

    Choose

  5. Select I want to I want to set up my Internet connection manually, or I want to connect through a Local Area Network (LAN), as shown below and click Next

    Set

  6. Select I connect through a phone line and a modem, then click Next

    I

  7. Type in the dial-up number, 0198 308 007, as shown below. Click Next

    Enter

  8. Enter your User name and Password (you should have received this on your Welcome Letter). Click Next

    Enter

  9. Enter in Real Time for the connection name. Click Next

    Enter

  10. Select No and Click Next

    Set

  11. Click Finish

    Click

 

Configuring your Dial-up Connection

  1. You should now see a Real Time icon in the Dial-Up Networking window. Right Mouse Click on the Real Time Icon and select Properties

    Access

  2. A new window entitled Real Time will come up, click the Server Types Tab

    Edit

  3. Select PPP: Internet, WIndows NT Server, Windows 98 for the type of Dial-Up Server. The only check marked box should be TCP/IP. Click on the TCP/IP Settings.. button

    Select

    • Another window will open with the title TCP/IP Settings. Select Server assigned IP address and Server assigned name server addresses. Also, place a check in front of Use IP header compression and Use default gateway on remote network. Click OK. And click OK on the Real Time window to close it

    Modify

Connecting to Real Time

  1. To connect to Real Time, double-click the Real Time icon

    Initial

  2. Enter your Real Time User name and Password and click Connect

    Click

Viewed with any Browser
8:09 PM - Tuesday Dec 12, 2017                        

     Copyright © Noel Butler 2001-2017. All rights Reserved.